P4s333vm manual

Position the fan with the retention mechanism on top of the heatsink. Align and snap the four hooks of the retention mechanism to the holes on each corner of the module base. Make sure that the fan and retention mechanism assembly perfectly fits the heatsink and module base, otherwise you cannot snap the hooks into the holes. Hardware monitoring errors may occur if you fail to plug this connector.

Page System Memory 2. Page Installing A Dimm 2. Failure to do so may cause severe damage to both the motherboard and the components. Follow these steps to install a DIMM. Page Removing A Dimm 1. Simultaneously press the retaining clips outward to unlock the DIMM. Support the DIMM lightly with your fingers when pressing the retaining clips.

The DIMM might get damaged when it flips out with extra force. Remove the DIMM from the socket. Page Expansion Slots 2. The following sub-sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. Page Pci Slots 2.

Page 40 2. Page 42 2. Page 43 These are not jumpers! DO NOT place jumper caps on the fan connectors! Page 44 5. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

Page 45 Intel front panel audio cable. By default, these pins are shorted. Page 46 9. The LED lights up when you turn on the system power, and blinks when the system is in sleep mode. Page 50 Chapter 2: Hardware information Follow the instructions in Chapter 4. Page Powering Off The Computer 3. Page 58 5. Select 1. Careless updating may result to more problems with the motherboard! If this happens, call the ASUS service center for support. Page Bios Setup Program Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purposes only, and may not exactly match what you see on your screen.

Page Bios Menu Bar 4. Page Scroll Bar While moving around through the Setup program, note that explanations appear in the Item Specific Help window located to the right of each menu. This window displays the help text for the currently highlighted field. Page Main Menu 4. The format is hour, minute, second. Valid values for hour, minute and second are Hour: 00 to 23 , Minute: 00 to 59 , Second: 00 to Incorrect settings may cause the system to fail to recognize the installed hard disk.

Refer to the drive documentation or on the drive label for this information. Position the CPU above the socket such that its marked corner matches the base of the socket lever. Chapter 1 This chapter describes the features of the P4S motherboard. This cable is required by The file you selected appears on the space next to it. Copy the wave files that you recorded to the database. Careless updating may result to more problems with the motherboard! Install the software drivers for the expansion card.

MAIN Use this menu to make changes to the basic system configuration. Managing And Updating Your Bios 4. Powering Off The Computer Powering off the computer You must first exit the operating system and shut down the system before switching off the power.

The contents of the support CD are subject to change at any time without notice. This feature gives you vocal POST messages and alerts to inform you of system events and boot status. Connect the power cord to a power outlet that is equipped with a surge protector.

Turn on the devices in the following order:. External SCSI devices starting with the last device on the chain. System power if you are using an ATX power supply, you need to switch on the power supply as well as press the ATX power switch on the front of the chassis.

After applying power, the power LED on the system front panel case lights up.